Objective: To investigate the age- and gender-related changes in upper and lower incisors' position and inclination in different vertical craniofacial relationships. Materials and Methods: A retrospective study on patients' records of age 8-48 years. The sample was divided based on Frankfort mandibular plane angle into three groups; normal, high, and low angle groups. It was then subdivided according to age. Upper and lower incisors' inclinations and positions were assessed from lateral cephalometric radiographs. Gender and age associations and effects size were calculated using two-way ANOVA tests. Significance level was set at P < 0.05. Results: Four hundred and twenty records (F = 272, M = 148) were included; 115 had normal, 81 low, and 250 had high vertical relationships with no significant age and gender distribution differences (P > 0.05). All significant associations and effects were found in the low angle group only. A significant association was found between gender and upper incisor inclination (P < 0.05) with medium effect size (0.13 ≤ ηp ² < 0.26). An association is also found between age × gender interaction and upper incisor inclination and lower incisor position (P < 0.05) with large effect size (0.26 ≤ ηp ² ). Conclusion: Age- and gender-related upper and lower incisor changes were found to be significant in subjects with decreased vertical skeletal pattern only. The upper incisor inclination and the lower incisor position were the most affected variables with age and gender.

Objective: To investigate the influence of silver (Ag), zinc oxide (ZnO), and titanium dioxide (TiO ₂ ) nanoparticles on shear bond strength (SBS). Materials and Methods: One hundred and twenty extracted premolars divided into four groups with thirty specimens in each group. Group 1 (control): brackets (American Orthodontics) were bonded with Transbond XT primer. Groups 2, 3, and 4: brackets (American Orthodontics) were bonded with adhesives incorporated with Ag, ZnO, and TiO ₂ nanoparticles in the concentration of 1.0% nanoparticles of Ag, 1.0% TiO ₂ , and 1.0% ZnO weight/weight, respectively. An "Instron" universal testing machine AGS-10k NG (SHIMADZU) was used to measure the SBS. The data were analyzed by SPSS software and then, the normal distribution of the data was confirmed by Kolmogorov-Smirnov test. One-way ANOVA test and Tukey's multiple post hoc procedures were used to compare between groups. In all statistical tests, the significance level was set at 5% (P < 0.05). Results: A significant difference was observed between control (mean [standard deviation (SD)] 9.43 [3.03], confidence interval [CI]: 8.30-10.56), Ag (mean [SD]: 7.55 [1.29], CI: 7.07-8.03), ZnO (mean [SD]: 6.50 [1.15], CI: 6.07-6.93), and TiO ₂ (mean [SD]: 6.33 [1.51], CI: 5.77-0.89) with SBS (F = 16.8453, P < 0.05) at 5% level of significance. Conclusion: Incorporation of various nanoparticles into adhesive materials in minimal amounts may decrease SBS and may lead to the failure of bracket or adhesive. The limitation of this study is that it is an in vitro research and these results may not be comparable to what the expected bond strengths observed in vivo. Further clinical studies are needed to evaluate biological effects of adding such amounts of nanoparticles and approve such adhesives as clinically sustainable.

Objectives: The aim of this study was to investigate the effects exerted by the acidulated fluoride gel on stainless steel and nickel-titanium (Ni-Ti) orthodontic wires. Materials and Methods: Sixty stainless steel and Ni-Ti orthodontic archwires were distributed into forty archwires used for in vitro study and twenty for in situ study. Fluoride was applied for 1 h in the in vitro experiment while it was applied for 5 min in the in situ experiment. The friction resistance of all wires with ceramic brackets before/after topical fluoride application was measured using a universal testing machine at 1 min intervals of moving wire. Moreover, surface properties of the tested wires before/after fluoride application and before/after friction test were examined by a scanning electron microscope (SEM). Dunnett's t-test was used to compare frictional resistance of as-received stainless steel wires and Ni-Ti wires to the wires treated by fluoride in vitro and in situ (P < 0.05). Two-way ANOVA was used to compare the effect of fluoride application and type of wire on friction resistance in vitro and in situ (P < 0.05). Results: Ni-Ti wires recorded significantly high friction resistance after fluoride application when compared to stainless steel wires in vitro, P < 0.05. Fluoride application did not significantly affect the friction resistance of the tested wires in situ, P < 0.05. SEM observation revealed deterioration of the surface texture of the Ni-Ti wires after fluoride application in vitro and in situ. Conclusions: The in vitro fluoride application caused an increase in friction resistance of Ni-Ti wires when compared to stainless steel wires. In vitro and in situ fluoride application caused deterioration in surface properties of Ni-Ti wires.

Aims: This study is conducted to determine the amount of distortion of digital panoramic radiographs. Materials and Methods: Panoramic radiographs of all patients who received dental implants in the years 2012 and 2013 were selected from the records at the faculty of dentistry, King Abdulaziz University. Radiographs were analyzed using the R4 Kodak Software for linear measurements of implants length and width. The measurements were compared to the actual size of the implant, and the amount of distortion was calculated. Results: A total of 169 implants were analyzed. Horizontally, there was a statistically significant increase of 0.4 mm in width in the radiographic measurement compared to the actual size in the incisor region. Vertically, the sample overall exhibited a decrease by 0.4 mm compared to the actual size. Incisors had the highest difference with a decrease of 1.7 mm in the radiographic measurements compared to actual size. The highest distortion was found in the incisor region for both diameter and length (1.1 and 0.86), respectively. Conclusion: Digital panoramic radiographs show minimal to no distortion. The highest distortion is found in the anterior area.

Introduction: Archwires act as gears to move teeth with light, continuous forces. However, the intraoral use of orthodontic archwires is liable to surface deposits which alter the mechanical properties of archwires, causing an increase in the friction coefficient. Objectives: To evaluate the surface changes of the stainless steel archwires after 6 weeks of intraoral use and its influence on frictional resistance during sliding mechanics. Materials and Methods: As-received rectangular 0.019" × 0.025" stainless steel orthodontic archwires (control) were compared with the archwires retrieved after the final phase of leveling and alignment stage of orthodontic treatment collected after 6 weeks of intraoral exposure (test samples) from 10 patients undergoing treatment. The control and test samples were used to evaluate surface debris using Scanning Electron Microscopy, surface roughness was assessed using Atomic Force Microscope and frictional forces were measured using Instron Universal Testing Machine in the buccal inter-bracket region that slides through the molar tube for space closure. Unpaired t-test and Pearson correlation tests were used for statistical analysis (P < 0.05 level of significance). Results: Significant increase was observed in the level of debris (P = 0.0001), surface roughness (P = 0.0001), and friction resistance (P = 0.001) of orthodontic archwires after their intraoral exposure. Significant positive correlations (P < 0.05) were also observed between these three variables. Conclusion: Stainless steel test archwires showed a significant increase in the degree of debris and surface roughness, increasing the frictional forces between the archwire-bracket interfaces which would considerably reduce the normal orthodontic forces. Thus, continuing the same archwire after levelling and alignment for space closure is not recommended.

This article reports the orthodontic treatment of a 20-year-old patient with dental crowding and temporomandibular joint disorders (TMDs). The patient presented moderate anterior crowding with a Class I molar relationship and masticatory disturbance in the mandibular position induced by previous splint therapy. Orthodontic treatment with multi-bracket appliance was initiated to correct the anterior crowding in both dental arches, after the extraction of first premolars and third molars, and also to maintain the splint-induced position of the condyles. After 26 months of treatment, an acceptable occlusion was achieved without any TMD symptoms. After 18-month retention, flattening on the right condyle was observed, possibly as an adaptative remodeling. After 16-year retention period, the occlusion was maintained without recurrence of any TMD symptoms, indicating a long-term stability of occlusion and temporomandibular joint (TMJ) components. Our results suggest the possibility of compromised treatment in patients with TMD to achieve a long-term stability in occlusion and TMJ function.

Accurate diagnosis and treatment planning are essential for obtaining ideal treatment result in cases involving mandibular incisor extraction. This case report describes a 15-year-old female with balanced soft-tissue profile, peg-shaped maxillary lateral incisors, and moderate mandibular anterior crowding treated with a mandibular incisor extraction. Ideal overbite and overjet were achieved. "Black triangle" formation was avoided due to the bodily movement of mandibular incisors and the use of uprighting springs for ideal axial inclination of mandibular incisors. A mandibular incisor extraction can be an effective treatment option in carefully selected clinical situations.

Objective: To cephalometrically evaluate and compare the skeletal, dentoalveolar, and soft tissue changes after maxillary protraction with skeletally anchored and conventional facemask. Methods: The data for the study were collected from the pre- and post-treatment records of patients of maxillary retrusion treated with skeletally anchored and conventional facemask therapy. Twenty subjects were included in the study and were categorized into two groups, namely skeletal anchored maxillary protraction (SAMP) group with the mean age of 10.10 ± 1.1 years and conventional facemask maxillary protraction (CFMP) group with the mean age of 9.90 ± 1.1 years. Pre and post-treatment lateral cephalograms were assessed. Results: The data were analyzed by Mann-Whitney test and Wilcoxon signed-rank test. The mean duration of treatment in SAMP group and CFMP group was 5.8 months and 10 months, respectively. The mean forward displacement of the maxilla (vertical point A) was 3.40 ± 1.07 mm in SAMP group and 2.80 ± 0.79 mm in CFMP group. The mandible showed downward and backward rotation in both the groups with more rotation in CFMP group. A significant increase in maxillary incisor inclination was seen in CFMP group as compared to SAMP group. A significant decrease was found in mandibular incisor inclination in both the treatment groups. The soft tissue changes corresponded to underlying skeletal tissue. C onclusions: SAMP is proven to be a better treatment modality as compared to CFMP for achieving true skeletal changes and minimal dental changes in cases with developing skeletal Class III with maxillary retrusion.

Introduction: The objectives of the present study were to elucidate the effects of fluorosis in orthodontic bonding and to evaluate the efficiency of an adhesion promoter (Assure Universal Bonding Resin) in bonding to fluorosed teeth. Materials and Methods: Extracted premolars were divided into two groups on the basis of Thylstrup and Fejerskov Index. Ten samples from each group were etched and evaluated for etching patterns using scanning electron microscope (SEM). The remaining samples were subdivided into four groups of 20 each on the basis of adhesives used: IA, IIA - Transbond XT and IB, IIB - Transbond XT plus Assure Universal Bonding Resin. Shear bond strength (SBS) was measured after 24 h using the universal testing machine. Adhesive remnant index (ARI) scores were recorded using SEM. Statistical analysis was conducted using a two-way analysis of variance, and Tukey's post hoc test was performed on SBS and ARI scores. Results: Similar etching patterns were observed in both fluorosed and nonfluorosed teeth. No significant differences were found in the SBS values observed in both groups (8.66 ± 3.19 vs. 8.53 ± 3.44, P = 1.000). Increase in SBS was observed when Assure Universal Bonding Resin was used. Higher ARI scores were observed when adhesion promoter was used for bonding. Conclusions: Mild-moderately fluorosed teeth etch in a manner similar to the nonfluorosed teeth. Similar bond strengths were achieved in fluorosed and nonfluorosed teeth when conventional composite was used. Use of adhesion promoter increases the bond strengths in both groups of teeth.

Introduction: The aims of this study were to establish the prevalence of dental features that indicate a need for early intervention and to ascertain the prevalence of different methods of early treatment among a population of Nigerian children in mixed dentition. Methods: Occlusal relationships were evaluated in 101 children in mixed dentition between the ages of 6 and 12 years who presented at the Orthodontic Unit, Department of Child Dental Health, Lagos University Teaching Hospital over a 2 years period. The need for different modes of early orthodontic treatment was also recorded. Results: Anterior tooth rotations (61.4%) and increased overjet (44.6%) were the most prevalent occlusal anomalies. Others included deep bite (31.7%), reverse overjet (13.9%), and anterior open bite (14.8%). Severe maxillary spacing and crowding were exhibited in 12.0% and 5.0%, respectively. About a third (35.7%) of the subjects presented with crossbite while lip incompetence was observed in 43.6% of the subjects. About 44% of the subjects also presented with various oral habits with digit (15.8%) and lip sucking (9.9%) being the most prevalent. Subjects were recommended for treatment with 2 by 4 fixed orthodontic appliances (22.3%), habit breakers (20.7%), removable orthodontic appliances (16.5%), and extractions (15.7%). Conclusions: Increased overjet and anterior tooth rotation were the majority of occlusal anomalies seen, which are not only esthetically displeasing but may also cause an increased susceptibility to trauma to these teeth. Treatment options varied from extractions only to the use of appliance therapy.

This case report describes the successful treatment of a patient with mandibular laterognathism and associated facial asymmetry with combined surgical orthodontic approach. After 7 months of presurgical orthodontic treatment, intraoral vertical ramus osteotomy, and straightening genioplasty were performed as two step surgeries to reposition the deviated mandible and chin, respectively. The total active treatment period was 14 months. After surgical orthodontic treatment, significant improvement in occlusion, masticatory function, and facial appearance was discernible. Posttreatment records at 3 years showed stable results with good occlusion.

Objective: To compare the stain resistance of three types of clear elastomeric modules exposed to several common dietary substances through the assessment of the perception of a group of dentists to discoloration using visual analog scale (VAS). Materials and Methods: Elastomeric modules from Unitek (AU), Ormco (OR), and dentaurum (DE) were immersed in the following food substances: Coffee, black tea, chocolate, energy drink, ketchup, and Coca-Cola for 72 h. VAS was used to reflect the module staining severity. Results: Significant difference was found among the three types of modules examined in this study. OR modules showed the least mean staining ratings by the examiners. There was no statistical difference in the staining properties between AU and DE modules. Coffee and tea showed higher staining potential as compared to all staining media. Furthermore, there was no difference in the staining characteristics of coffee and black tea. Conclusions: Coffee and tea are strong staining media that should be avoided by patients who opted to have esthetic appliances for their orthodontic treatment. Elastomeric modules manufactured by AU showed higher staining optical properties as compared to the other two companies, which could be related to the manufacturing processing of these modules.

Objectives: To evaluate the effect of moments and the combination of forces and moments on the mechanical properties of a bracket type miniscrew, resembling engagement of a rectangular wire by three-dimensional (3D) finite element study. Materials and Methods: By solid work software (Dassaunlt systems solid works, concord, Mass), a 3D miniscrew model of 6, 8, 10 mm lengths was designed and inserted in the osseous block, consisted of the cortical, and cancellous bones. The stress distributions, maximum stresses, and deflections of the miniscrew were evaluated for all parts using ANSYS (Work Bench, 2014). Results: As the magnitudes of the load increased from 100 to 200, 400 and 800 grf-mm, the peak of stresses in the 6 mm long miniscrew were increased from 7.7 to 61.5 Mpa. The maximum values of Von Mises in the cancellous bone were tremendously lower in comparison to the cortical bone by one hundredth. As the length of the miniscrew in contact with the bone was increased, the amounts and patterns of stress distribution in the cortical bone and the miniscrew did not change significantly. Conclusions: As the moment magnitude increased, the pick stresses increased linearly. The existence of cancellous bone was not significantly responsible for the stress distribution. The pattern of stress distribution did not change by the length of the miniscrew.

Objectives: Facial Aesthetics, a major consideration in orthodontic diagnosis and treatment planning, may not be judged correctly and completely by simply analyzing dental occlusion or osseous structures. Despite this importance, there is no index to guarantee availability of treatment or prioritize patients based on their soft tissue treatment needs. Individuals having well-aligned teeth but unaesthetic convex profiles do not get included for treatment as per current malocclusion indices. The aim of this investigation is to develop an aesthetic index based on facial profiles which could be used as an additional tool with malocclusion indices. Materials and Methods: A chart showing typical facial profile changes due to underlying malocclusions was generated by soft tissue manipulations of standardized profile photographs of a well-balanced male and female face. A panel of 62 orthodontists judged the profile photographs of 100 patients with different soft tissue patterns for assessing profile variations and treatment need. The index was later tested in a cross-section of school population. Statistical analysis was done using "irr" package of R environment version 2.15.1. Results: The index exhibited very good reliability in determining profile variations (Fleiss kappa 0.866, P < 0.001), excellent reproducibility (kappa 0.9078), high sensitivity, and specificity (95.7%). Testing in population yielded excellent agreement among orthodontists (kappa 0.9286). Conclusions: A new Facial Aesthetic index, based on patient's soft tissue profile requirements is proposed, which can complement existing indices to ensure treatment to those in need.

Objectives: To compare the levels of pentraxin 3 (PTX-3) in gingival crevicular fluid (GCF) in patients undergoing orthodontic canine retraction with active tieback and nickel titanium (NiTi) coil spring. Materials and Methods: Fifteen patients of the age group 15-25 years with first premolar extraction undergoing canine retraction were selected. One month after placement of 0.019" × 0.025" stainless steel wire, canine retraction was started with active tieback (150 g force) on upper right quadrant and NiTi coil spring (150 g force) on upper left quadrant. GCF samples were collected 1 h before commencement of canine retraction and thereafter at intervals of 1 h, 1 day, 1 week, and 2 weeks after application of force. The collected GCF was eluted from the microcapillary pipette in 100 μl phosphate-buffered saline (pH 5-7.2). The samples were analyzed for PTX-3 levels by the ELISA technique. Results: The mean levels of PTX-3 at 1 h before canine retraction (baseline) was 1.30 ± 0.22 ng/ml and at 1 h 1.66 ± 0.33 ng/ml, 1 day 2.65 ± 0.09 ng/ml, 1 week 1.96 ± 0.15 ng/ml, and 2 weeks 1.37 ± 0.18 ng/ml in active tieback group. The mean levels of PTX-3 at 1 h before canine retraction was 1.32 ± 0.30 ng/ml, and at 1 h 1.71 ± 0.39 ng/ml, 1 day 2.78 ± 0.12 ng/ml, 1 week 2.52 ± 0.18 ng/ml, and 2 weeks 2.12 ± 0.17 ng/ml in NiTi coil spring group. A significant difference of P < 0.001 was found in PTX-3 levels in GCF during canine retraction between active tieback and NiTi coil spring at 1 day, 1 week, and 2 weeks. Conclusion: The results showed that PTX-3 levels increased from 1 h after application of orthodontic force and reached peak at 1 day, followed by a gradual decrease at 1 week and 2 weeks in both active tie back and NiTi coil spring groups.

Objective: To evaluate esthetics perception and satisfaction of the facial profile among Iranian male adolescents and adults. Materials and Methods: In this cross-sectional study, male subjects referred to Orthodontic Department of Mashhad Dental School were enrolled (n = 84) and were divided into two groups: Adolescents (n = 39), and adults (n = 45). They were also assigned to straight, convex, or concave profile groups based on the facial profile angle (G-Sn-Pog'). An ideal silhouette of the lower facial profile was designed in Adobe® Photoshop® CS2 software (Kansas, USA). Then, eight other silhouettes representing different relations of the maxilla and mandible were constructed. Patients were asked to use numbers 1-10 to rank the facial profiles in the order of the attractiveness, and choose a silhouette that best closely resembled their own profile. Moreover, using a questionnaire patients were asked to rank their satisfaction with their profile, and asked to assign a number (1-5) to each question as follows; one represented the least satisfaction, while five reflected the highest satisfaction. Results: Adult and adolescent subjects with straight (adults: 12.0 ± 1.9, adolescents: 12.8 ± 1.05) and concave (adults: 10.0 ± 2.14, adolescents: 10.0 ± 2.08) profile showed the highest and the least satisfaction with their own profile, respectively. Both adult and adolescent group selected "retrognathic maxilla, prognathic mandible" as the least attractive profile. Overall, "straight" and "bimaxillary dentoalveolar retrusion" were chosen as the most attractive silhouettes in adolescent and adults, respectively. In comparison to a professional opinion (clinician ranking), 42.9% of adolescents and 22% of adults were able to correctly diagnose their own profiles type. Conclusion: Most of the male adolescents and especially adults diagnosis of their own profile differed with a professional assessment.

Conventional orthognathic surgery treatment involves a prolonged period of orthodontic treatment (pre- and post-surgery), making the total treatment period of 3-4 years too exhaustive. Surgery-first orthognathic approach (SFOA) sees orthognathic surgery being carried out first, followed by orthodontic treatment to align the teeth and occlusion. Following orthognathic surgery, a period of rapid metabolic activity within tissues ensues is known as the regional acceleratory phenomenon (RAP). By performing surgery first, RAP can be harnessed to facilitate efficient orthodontic treatment. This phenomenon is believed to be a key factor in the notable reduction in treatment duration using SFOA. This article presents two cases treated with SFOA with emphasis on "case selection, treatment strategy, merits, and limitations" of SFOA. Further, salient features comparison of "conventional orthognathic surgery" and "SFOA" with an overview of author's SFOA treatment protocol is enumerated.

With the introduction of miniscrews into the orthodontic field, the efficiency and effectiveness of treating complex cases have significantly improved. Biomechanical considerations, especially relating to anchorage control have become less of a concern and side effects, as a consequence, have become minimal. This article reports on a canine impaction case in which an orthodontic miniscrew has been used to effectively and efficiently pull the canine, thereby reducing anchorage unit side effects and simplifying treatment mechanics.

Objectives: To assess in vitro the quantitative and qualitative debonding behavior of the AEZ debonding plier, compared to shear debonding force, in debonding orthodontic metal brackets. Materials and Methods: Thirty-two extracted premolars bonded with metal brackets were randomly divided into two equal groups according to the type of simulated debonding method; compressive bond strength (CBS) group using AEZ debonding plier (Ormco Corporation, USA) attached to the Instron machine, and shear bond strength (SBS) group using regular Instron attachments. All teeth were subjected to debonding forces, and debonding strength was assessed. The buccal surfaces were then examined, under a stereomicroscope, and adhesive remnants were scored using adhesive remnant index (ARI). Debonding strengths comparison was performed using the independent sample t-test. ARI score comparison was performed using the Mann-Whitney U-test. Correlation between debonding strength and ARI scores was performed using the Spearman correlation. Results: There was no significant difference in mean debonding strength between the SBS (M = 6.17 ± 0.77 MPa) and CBS (M = 6.68 ± 1.67 MPa) groups (P > 0.05). The CBS group showed significantly less adhesive remnants than the SBS group (P < 0.05); 62.5% of CBS group had ARI score 1, whereas 68.8% of SBS group had ARI score 3. No significant correlation between ARI and debonding strength was found (P < 0.05). Conclusion: SBS was found to produce similar debonding strength to the AEZ debonding plier in vitro. However, the AEZ debonding plier resulted in less adhesive remnant which is of great advantage for reducing chair-time during cleanup after debonding brackets.

Background: Bonding brackets to dental surfaces restored with composites are increasing. No studies to date have assessed the efficacy of laser irradiation in roughening of composite and the resulted shear bond strength (SBS) of the bonded bracket. We assessed, for the 1 ^st time, the efficacy of two laser beams compared with conventional methods. Materials and Methods: Sixty-five discs of light-cured composite resin were stored in deionized distilled water for 7 days. They were divided into five groups of 12 plus a group of five for scanning electron microscopy (SEM): Bur-abrasion followed by phosphoric acid etching (bur-PA), hydrofluoric acid conditioning (HF), sandblasting, 3 W and 2 W erbium-doped yttrium aluminum garnet laser irradiation for 12 s. After bracket bonding, specimens were water-stored (24 h) and thermocycled (500 cycles), respectively. SBS was tested at 0.5 mm/min crosshead speed. The adhesive remnant index (ARI) was scored under ×10 magnification. SEM was carried out as well. Data were analyzed using analysis of variance (ANOVA), Kruskal-Wallis, Tukey, Dunn, one-sample t-test/Wilcoxon tests, and Weibull analysis (α =0.05). Results: The SBS values (megapascal) were bur-PA (11.07 ± 1.95), HF (19.70 ± 1.91), sandblasting (7.75 ± 1.10), laser 2 W (15.38 ± 1.38), and laser 3 W (20.74 ± 1.73) (compared to SBS = 6, all P = 0.000). These differed significantly (ANOVA P = 0.000) except HF versus 3 W laser (Tukey P > 0.05). ARI scores differed significantly (Kruskal-Wallis P = 0.000), with sandblasting and 2 W lasers having scores inclined to the higher end (safest debonding). Weibull analysis implied successful clinical outcome for all groups, except for sandblasting with borderline results. Conclusion: Considering its high efficacy and the lack of adverse effects bound with other methods, the 3 W laser irradiation is recommended for clinical usage.

Background: Marking pencils which are frequently used in orthodontics may cause microbial contamination. The purpose of this study was to evaluate and compare the effectiveness of three disinfection and sterilization methods (autoclave, glutaraldehyde solution, and Deconex spray) on orthodontic markers. Materials and Methods: One hundred and twenty orthodontic markers were divided into four groups each 30 pencils: One control group and three groups for three different disinfection/sterilization methods. To evaluate the effectiveness of these methods, pencils were initially contaminated by common pathogen by immersing the pencils in a suspension containing 1.5 × 10 ⁸ CFU/ml organisms. Then, the pencils were subjected to corresponding disinfection/sterilization methods, and the number of remaining microorganisms was calculated and compared with control group. Results: In the control group, the mean number of Escherichia coli was significantly higher than the other two microorganisms (P = 0.01, P = 0.031). However, the mean numbers of Staphylococcus aureus and Candida albicans were not significantly different (P = 0.1). After sterilization with autoclave and glutaraldehyde, no microbial growth was observed, whereas after disinfection with Deconx spray some colonies of microorganisms still could be observed. Conclusion: Autoclaving and glutaraldehyde solution are the best methods for disinfecting orthodontic markers.

Aim: To assess the effects of adding nano-titanium dioxide (nano-TiO ₂ ) and nano-silicon dioxide (nano-SiO ₂ ) and their mixture to poly (methyl methacrylate) (PMMA) to induce antimicrobial activity in acrylic resins. Materials and Methods: Acrylic specimens in size of 20 mm × 20 mm × 1 mm of 0.5% and 1% of nano-TiO ₂ (21 nm) and nano-SiO ₂ (20 nm) and their mixture (TiO ₂ /SiO ₂ nanoparticles) (1:1 w/w) were prepared from the mixture of acrylic liquid containing nanoparticles and acrylic powder. To obtain 0.5% and 1% concentration, 0.02 g and 0.04 g of the nanoparticles was added to each milliliter of the acrylic monomer, respectively. Antimicrobial properties of six specimens of these preparations, as prepared, were assessed against planktonic Lactobacillus acidophilus and Streptococcus mutans at 0, 15, 30, 45, 60, 75, and 90 min follow-up by broth dilution assay. The specimens of each group were divided into three subgroups: Dark, daylight, or ultraviolet A (UVA). The percent of bacterial reduction is found out from the counts taken at each time point. Statistical Analysis: Data were analyzed using one-way analysis of variance and Tukey's post hoc analysis. Results: Exposure to PMMA containing the nanoparticles reduced the bacterial count by 3.2-99%, depending on the nanoparticles, bacterial types, and light conditions. Planktonic cultures of S. mutans and L. acidophilus exposed to PMMA containing 1% of TiO ₂ /SiO ₂ nanoparticles showed a significant decrease (P < 0.001) (98% and 99%, respectively) in a time-dependent manner under UVA. The S. mutans and L. acidophilus counts did not significantly decrease in PMMA containing 0.5% nano-TiO ₂ and PMMA containing 0.5% nano-SiO ₂ in the dark. No statistically significant reduction (P > 0.05) was observed in the counts of S. mutans and L. acidophilus in PMMA without the nanoparticles exposed to UVA. Conclusions: PMMA resins incorporated with TiO ₂ /SiO ₂ nanoparticles showed strong antimicrobial activity against the cariogenic bacteria.

Objective: The aims of this study were to determine the prevalence of hypodontia in the permanent dentition in a sample of Qatari patients attending a dental center and to compare the results with the reported findings of other populations. Materials and Methods: Orthodontic files including orthopantomographs of 1000 patients (655 females and 345 males, 11-36-year-old) were examined and inspected for evidence of hypodontia. Results: The prevalence of hypodontia in the present Qatari sample was 7.8%; 6.9% was in males and 8.2% in females. Hypodontia was found more frequently in the maxilla than in the mandible. The distribution of missing teeth was noticed in the left side more than the right side. The most frequently missing teeth were the maxillary lateral incisors followed by the mandibular second premolars, maxillary second premolars, and mandibular left lateral incisor. The majority of patients with hypodontia had one or two teeth missing, but rarely more than four teeth were missing in the same patient. Bilateral missing teeth in the current study was commonly seen in the maxillary lateral incisor (14.1%) followed by mandibular second premolar (12.8%) and maxillary second premolar (6.4%). Conclusions: The prevalence of hypodontia in a sample of Qatari individuals was within the range reported in the literature for other populations. The incidence of hypodontia in the anterior segment requires multidisciplinary team approach (orthodontic and prosthodontic) to restore the esthetic and function and improve patient self-esteem.

Objectives: To conduct an epidemiological survey of the orthodontic debonding techniques in Italy, and describe the most commonly used methods to remove the brackets and adhesive from the tooth surfaces. Materials and Methods: A survey consisting of 6 questions about bracket debonding methods and instruments used was emailed to 1000 orthodontists, who were members of the Italian Orthodontics Society (SIDO. Clinicians were characterized by different sex, age, origin, and professional experience. Results: Overall, 267 surveys were returned, representing a response rate of 26.7% of the participants interviewed. The 0.2% of the orthodontists responded, via email, confirming that they were not interested, while 3% of the questionnaires were sent back not completed. The 70.1% of the clinicians interviewed did not return any response. Overall, 64% of SIDO members (orthodontists) did not detect any enamel damage after debonding. The brackets used most frequently (89.14%) in clinical practice were the metal ones. The most commonly used pliers for bracket removal were cutters (37.08%) and bracket removal pliers (34.83%). For adhesive removal, low speed tungsten carbide burs under irrigation were the most widely utilized method for adhesive removal (40.08%), followed by high speed carbide burs (14.19%), and diamond burs (14.19%). The most frequently used instruments for polishing after debonding were rubber cups (36.70%) and abrasive discs (21.35%). The 31.21% of the orthodontists found esthetic enamel changes before bonding versus after debonding. Conclusions: This survey showed the high variability of different methods for bracket debonding, adhesive removal, and tooth polishing. The collected answers indicate that most orthodontists have developed their own armamentarium of debonding and polishing, basing their method on trials and errors.

Objective: To investigate the intensity of pain adolescent orthodontic patients experience following the insertion of separators. Materials and Methods: Elastomeric separators were placed mesially and distally to the first molars in 62 adolescents (20 male, 42 female, age 12–15 years), and the participants were given self-administrated questionnaires to document perceived pain, pain upon chewing, and the severity of pain's affecting daily life, using a visual analog scale for seven days. Results: The mean perceived pain scores out of 100 on the first 3 days were 54.6 ± 32.7, 51.7 ± 29.9, and 32.3 ± 28.4, respectively; chewing pain scores were: 61.9 ± 35.3, 52.6 ± 30.4, and 39.5 ± 32.1, respectively; the pain's affecting daily life scores were 24.9 ± 35.5, 21.1 ± 30.9, and 11.9 ± 23.7, respectively. A Kruskal–Wallis test showed a statistically significant difference in the reported pain between the three studied parameters. A Mann–Whitney U-test showed an insignificant difference between male and female adolescents. Conclusion: Pain perception varies among adolescent patients, but it decreases significantly after the first 2 days, with no gender differences.

Aims: A new Resin Modified Glass Ionomer Cement known as nanoionomer containing nanofillers of fluoroaluminosilicate glass and nanofiller 'clusters' has been introduced. An in-vitro study aimed at evaluating shear bond strength (SBS) and adhesive remnant index (ARI) of nanoionomer under etching/unetched condition for use as an orthodontic bonding agent. Material and Methods: A total of 75 extracted premolars were used, which were divided into three equal groups of 25 each: 1-Conventional adhesive (Enlight Light Cure, SDS, Ormco, CA, USA) was used after and etching with 37% phosphoric acid for 30 s, followed by Ortho Solo application 2-nanoionomer (Ketac^™ N100, 3M, ESPE, St. Paul, MN, USA) was used after etching with 37% phosphoric acid for 30 s 3-nanoionomer was used without etching. The SBS testing was performed using a digital universal testing machine (UTM-G-410B, Shanta Engineering). Evaluation of ARI was done using scanning electron microscopy. The SBS were compared using ANOVA with post-hoc Tukey test for intergroup comparisons and ARI scores were compared with Chi-square test. Results: ANOVA (SBS, F = 104.75) and Chi-square (ARI, Chi-square = 30.71) tests revealed significant differences between groups (P < 0.01). The mean (SD) SBS achieved with conventional light cure adhesive was significantly higher (P < 0.05) (10.59 ± 2.03 Mpa, 95% CI, 9.74-11.41) than the nanoionomer groups (unetched 4.13 ± 0.88 Mpa, 95% CI, 3.79-4.47 and etched 9.32 ± 1.87 Mpa, 95% CI, 8.58-10.06). However, nanoionomer with etching, registered SBS in the clinically acceptable range of 5.9–7.8 MPa, as suggested by Reynolds (1975). The nanoionomer groups gave significantly lower ARI values than the conventional adhesive group. Conclusion: Based on this in-vitro study, nanoionomer with etching can be successfully used as an orthodontic bonding agent leaving less adhesive remnant on enamel surface, making cleaning easier. However, in-vivo studies are needed to confirm the validity of present findings.

Objectives: The objectives of this study were to determine the prevalence of snoring in an adult male university population, and to test the null hypothesis that there is no difference in facial profile shape, malocclusion type, or palatal morphology among snorer and nonsnorer. Materials and Methods: Berlin questionnaire was given to 840 students and employees aged 18–45 years (24 ± 40). Both snorers and nonsnorers were assessed for the facial profile type, malocclusion type, and palatal morphology. Chi-square and Student's t-test were used to compare the difference between the two groups. Results: The prevalence of snoring was 16.28%. The most frequent findings among snorer were straight profiles (52.0%), Class I malocclusion (74.7%), and V palatal shape (16.0%), respectively. The Chi-square test revealed a significant difference in terms of V-shaped palatal morphology (P < 0.05); higher neck circumference (NC) (P < 0.007); upper arch length was significantly shorter (P < 0.038); and the inter- first upper premolar distance was significantly narrower (P < 0.013). Conclusion: The null hypothesis is rejected. Snoring in our university population is associated with V-shape palatal morphology, increased NC and decrease in the upper arch length, and inter- first upper premolar distance.

Objectives: The objectives were to evaluate the shear bond strength (SBS) of fiber-reinforced composite (FRC) retainers when bonding them to teeth with and without covering the FRC bars using two different adhesive systems. Materials and Methods: Hundred and twenty extracted human maxillary premolars were randomly divided into eight groups (n = 15). FRC bars (4 mm length, Everstick Ortho^®, Stick Tech, Oy, Turku, Finland) were bonded to the proximal (distal) surfaces of the teeth using two different adhesives (Tetric Flow [TF, Ivoclar Vivadent, Switzerland] and resin-modified glass ionomer cement [RMGIC, ODP, Vista, CA, USA]) with and without covering with the same adhesive. Specimens were exposed to thermocycling (625 cycles per day [5–55°C, intervals: 30 s] for 8 days). The SBS test was then performed using the universal testing machine (Zwick, GMBH, Ulm, Germany). After debonding, the remaining adhesive on the teeth was recorded by the adhesive remnant index (0–3). Results: The lowest mean SBS (standard deviation) was found in the TF group without covering with adhesive (12.6 [2.11] MPa), and the highest bond strength was in the TF group with covering with adhesive (16.01 [1.09] MPa). Overall, the uncovered RMGIC (15.65 [3.57] MPa) provided a higher SBS compared to the uncovered TF. Covering of FRC with TF led to a significant increase in SBS (P = 0.001), but this was not true for RMGIC (P = 0.807). Thermal cycling did not significantly change the SBS values (P = 0.537). Overall, eight groups were statistically different (ANOVA test, F = 3.32, P = 0.034), but no significant differences in bond failure locations were found between the groups (Fisher's exact tests, P = 0.92). Conclusions: The present findings showed no significant differences between SBS of FRC bars with and without covering by RMGIC. However, when using TF, there was a significant difference in SBS measurements between covering and noncovering groups. Therefore, the use of RMGIC without covering FRC bars can be suggested, which can be validated with in vivo studies.

Background and Aim: The purpose of this study was to investigate whether different camera lenses and dental specialties can affect the perception of smile esthetics. Methods: In the first phase of this study, 40 female smile photographs (taken from dental students) were evaluated by six orthodontists, three specialists in restorative dentistry, and three prosthodontists to select the most beautiful smiles. The 20 students with the best smile ranks were again photographed in standard conditions, but this time with two different lenses: Regular and then macro lenses. Each referee evaluated the beauty of the smiles on a visual analog scale. The referees were blinded of the type of lenses, and the images were all coded. The data were analyzed using two-way analysis of variance (ANOVA), Kruskal–Wallis and Mann–Whitney U-tests (alpha = 0.05, alpha = 0.0167). Results: The lenses led to similar scores of beauty perception (Mann–Whitney P = 0.8). There was no difference between subjective beauty perception of specialties (Kruskal–Wallis P = 0.6). Two-way ANOVA indicated no significant role for lenses (P = 0.1750), specialties (P = 0.7677), or their interaction (P = 0.7852). Conclusion: The photographs taken by a regular lens and then digitally magnified can be as appealing as close-up photographs taken by a macro lens. Experts in different specialties (orthodontics, prosthodontics, and restorative dentistry) showed similar subjective judgments of smile beauty.